The ETC SDB 24/250 Deadbreak Straight Connector is a fully shielded and insulated plug-in termination, rated 250 amps, up to 24kV, connected with underground cable ranging from 25 to 120mm 2 (conductor cross section)
The ETC SDB 24/250 Deadbreak Straight are molded using hight quality peroxide-cured EPDM insulation. It is used to connect underground cable to transformers, switchgear and 250 amp bushing. The test point is available for use with hot line voltage indicators.
It is the essential component for high-voltage electrical connection of the pad-mounted transformers, submersible transformer, switchgear and
deadbreak bushings. The design of the straight connector allows connection of the cable in a straight line, not bend at an angle of 90 o
Description
===========================================================================================
- The ETCSDB 24/250 Deadbreak Straight Connector is a fully shielded and insulated plug-in termination, rated 250 amps, up to 24kV, connected with underground cable ranging from 25 to 120mm 2 (conductor cross section)
The ETCSDB 24/250 Deadbreak Straight are molded using hight quality peroxide-cured EPDM insulation. It is used to connect underground cable to transformers, switchgear and 250 amp bushing. The test point is available for use with hot line voltage indicators.
It is the essential component for high-voltage electrical connection of the pad-mounted transformers, submersible transformer, switchgear and
deadbreak bushings. The design of the straight connector allows connection of the cable in a straight line, not bend at an angle of 90 o
Additional information
| Weight | 1 kg |
|---|---|
| Dimensions | 10 × 10 × 10 cm |
